Perry,
I talked with the team (Dad) and it's a go, less time making prop, more
time making airplane. Turrentine says our motor NA will make about
290HP @ 6K rpm @ sea level. We plan for a cruise alt. around 10-12K ft
at a cruise rpm of 2400 prop and airspeed of 230 mph. Rotation as per
RD-1B redrive - clockwise I think. 3 blades. I think 76" diameter
should do, I'll check to make sure.
Chris:
I forgot to ask about your RD-1B gear ratio when we visited in SLC. If it
is a 2.17 ratio and you're using a 76" prop you'll probably need to limit
max rpm to about 5800. That'll cut your power a little but will avoid
transonic shock waves. Also, it'll be turning counterclockwise.
Enjoyed the visit.
Tom Parkes
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.