Subject: Recycle Fuel of fuel to filter/header tank
From: ACRE
Date: 8/22/2003, 12:58 AM


The no return systems are predicated on the high pressure pump being IN the tank.
It might work if the pump is very very close to the tank.

Paul Lamar

Paul,

   Are these returnless systems a "new" thing?  FWIW, I've never
experianced any lock with mine (three years). My underhood temps get up
fairly high because of the turbo.  A stock Ford Focus pump is good for
at least 225 hp. (that's the most I've run so far) but I've been told it
will flow enough fuel for at least 300.

Phil


I'll bet your high pressure pump is located inside the fuel tank.

New as far as the Mazda rotary powered cars imported into the US are concerned.

Paul Lamar

 Yes it is Paul.  I've had it in and out a few times too! They (Ford)
put a 2" screen filter at the bottom of the fuel canister (the pump is
inside the canister as well) that has a nasty habit of clogging. There's
something about the type of lining Ford put on the inside of the gas
tank causes it to clog.  I finally chucked the filter. Now I'm crossing
my fingers my pump doesn't clog up and stop. I carry a spare pump with
me...just in case. :)

Phil Williamson

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.