Subject: proper material for shaft/ heli design-fixed pitch heli
From: ACRE
Date: 8/25/2003, 9:32 PM


Hello Phil Williamson,

I read some of the threads about your helicopter project:

Donīt want to discourage you, but:
a) This typ has been done before by "Eagles Perch Inc." - canīt find them on
the net anymore but you might find some images of their machine. Single
seat - twin engine - fixed pitch rotors - lift control via engine rpm
variation - safety via parachute thhat fires to the side, the steelcables of
the chute where supposed to cut the wooden rotorblades in the process! I
understand they sold quite a few kits!

b) As a professional helicopter pilot I urge you to abandon your fixed pitch
idea! You want to depend on a parachute that you hope you will never need,
but if you do you wonīt know if it works or not! If it works, how low can
you deploy it? On a regular helicopter I know for a fact that my rotorsystem
works and that I can change pitch anytime! I can autorotate from any
altitude even from 10ft instantly just by manipulating the controls I
already have my hands on - no need to find and activate a different
Emergency-handle!

I donīt think you are on to a pipe dream, but even though it makes it more
complicated, try to go for a adjustable pitch control. You might also check
up on Dave Jacksonīs site: http://www.synchrolite.com/UniCopter.html#Primary
You will find a HUGE amount of information about helicopters. He also was
dreaming about a coaxial design, but changed to a intermeshing one (like the
K-Max heavy lifter) for better aerodynamics and efficiency. He has a lot of
technical reference material, formulas, etc.
Whenever I start to dream about my personal design I consult his webpage!

Last, what was you reasoning FOR the ShopMaster-CNC against others?
There are quite few on the market, so to choose one is a tough call. What
spoke for the ShopMaster for you?

Thanks for your time,
Thomas Jakits

I'm trying to keep the whirlybird talk out of Paul's letter but real quick:

     Yes, I'm aware of the Eagles Perch coaxial (Also ...some suff I
don't like, such as the side shooting ballistic, yaw control via rudder
paddles...a few other things). I'd mount the ballistic above the rotors,
fixed to the frame through the  rotor shaft. My thoughts on using  two
rotories  so auto-rotation is not needed.  Auto-rotating is not an
option at times, even at 1000' :) . I'm attemping to remove the
complications of swashplates, linkages,  etc. that I would need. Now,
many others have tried this too...But my idea is better than theirs!
:)There's just to much mechanical stuff up there! The V-22 seems to be
able to move fine forward and aft just by tilting the rotor head (just a
thought in my mind). Here's another coaxial some guys are playing with.

http://www.airscooter.com/



As for my choice of the Shopmaster... Well, all I've seen was Sherline (too small), Grizzley (still thinking about these) and the Shopmaster. I'd rather have a longer lathe (it's only 22" but it's fine for modeling).


     Also, it's somewhat compact. This is my first venture into
machining equipment. I'm all ears for suggestions. My main concern is
that I'm able to learn from what I'm buying and that it'll work for what
I want to do. The price is right at under 3 grand.

Phil Williamson

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.