Edward Klepeis wrote:

Dear Paul
     In your picture of the cooling tube with your water pump is shown  a long alum tube type bottle. Are you making these
bottles or do you have someone  making them for you.If not I make the same bottle up for the subaru only shorter with a 16lbs
stainless steel cap.my bottles are 3'' in dia. and how ever long you would need for your set up. Let me know if I can be of
service to you.
                                                                  Regards
                                                                  Ed
                                                       tech welding

Not me I am a lousy tig welder :) Long is good. It needs a couple of fittings
on the top for vent lines from the top of the engine. I need to add those
into that 3D.

Paul Lamar

Dave Arbogast wrote:

Hi Paul, what flavor of welder to you have? I was looking at the Miller 180SD.

-dave
mailto:dave@arb.net
http://arb.net- 

I have a Lincoln 175. It is fine but a little limited for heavy aluminum plate.

BTW Dave and folks. Please place your message at the end of the quoted message
and then things will be in chronological order and your signature file will
be placed in the right place. I.E. after your message. Otherwise I have to move
things around.

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.