Subject: proper material for shaft/ heli design-fixed pitch heli
From: ACRE
Date: 8/26/2003, 6:11 AM


I'm trying to keep the whirlybird talk out of Paul's letter but real
quick:

     Yes, I'm aware of the Eagles Perch coaxial (Also ...some suff I
don't like, such as the side shooting ballistic, yaw control via
rudder
paddles...a few other things). I'd mount the ballistic above the
rotors,
fixed to the frame through the  rotor shaft. My thoughts on using  two
rotories  so auto-rotation is not needed.  Auto-rotating is not an
option at times, even at 1000' :) . I'm attemping to remove the
complications of swashplates, linkages,  etc. that I would need. Now,
many others have tried this too...But my idea is better than theirs!
:)There's just to much mechanical stuff up there! The V-22 seems to be
able to move fine forward and aft just by tilting the rotor head
(just a
thought in my mind). Here's another coaxial some guys are playing
with.


The V-22 uses a real rotorhead with collective and cyclic control in
addition to the hydraulically tilting action.

Hans


The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.