David Leonard wrote:

While I am posting pictures, here are a couple more of my

installation -

open season for constructive criticism.

David Leonard
The Rotary Roster:
http://members.aol.com/_ht_a/rotaryroster/index.html

That adjusting strut for the alternator needs to be made out
of .090 or .125 4130 steel sheet. That aluminum angle will fatigue
crack sooner than later.

Are you going to try the turbo without an intercooler?
If so watch your intake manifold temp and try to limit it to about
140 degrees F.

Paul Lamar

Will change out the adjusting strut.  I should have done that to start.
Will be easy now that I have an alum template.

I am just finishing mounting and plumbing the intercooler.  It will sit
behind the left cheek inlet.  The oil cooler is with the right cheek,
and the radiator is mounted beneath.  Will send some pics soon.

David Leonard
The Rotary Roster:
http://members.aol.com/_ht_a/rotaryroster/index.html

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.