Hello:
Has any one used one of these ida fuel injection systems that's on
ebay:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33558&item
=2428747307
Rich Gillen
Hi, Rich....sorry for the delay in responding to your question. The
IDA
setup looks almost like a carbon copy of the TKS system that I have,
which I
purchased from Atkins Rotary. I have it all mounted, but have not had
the
opportunity to run the engine yet (hopefully very soon). The two
injectors
appear to be mounted in the same fashion as mine, and the dual
throttlebody
casting looks nearly identical. A fellow named Rusty in Pensacola,
Florida
has one also, and his is running with the TKS system. Seems to run well.
His test flight is scheduled for possibly this Sunday, then I will know
more
about it. Hope this helps. Paul Conner, Mobile, AL
Rusty is using the manifold & throttle body you described but the EFI
controller in use is the EC2 from Real World Solutions. He is also using a
total of 4 injectors. The other two are mounted in the stock location in
the center housing.
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.