"Schemmel, Grant" wrote:

Hi Paul,

Do you still have a few of your intake pieces left?  Guess I would be interested after all.  
Let me know pricing and where to send the check to.

Also, there's an '87 turbo longblock on ebay I've been eyeing - 
any negatives you could point out towards building up one of these?

And one more... How about part interchangeability between model years?

Thanks!

Grant Schemmel
Penrose, CO

No negatives. Manifold castings are $185 and intake runners are 
$50 each plus $15 shipping for the works.

Send Check to:
Paul Lamar
830 East Santa Maria St.
Suite 303 <<<<<<<<<<<<<<<<<<<<<  VERY IMPORTANT
Santa Paula CA
93060
 
Speaking of the manifold I got the water pumps done and shipped out
today US mail. I am now focused on the dyno engine so I am working
on the manifold assemble. Here is what it looks like after I had the 
injector holders welded together and I cleaned it up. I did this on my
CC mill but it could be done with a body grinders and a sander.
I spent about an hour cleaning up and polishing  the bell mouths 
with a die grinder using sanding rolls.

Paul Lamar



The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.