"Burns, Mark" wrote:
Paul;
I am building a VariEze. It is a project that was started in '73. It
is in
very good shape, in fact, the original builder got an excellent rating
from RAF
for the wings and canard. I know what fiberglass cloth to use, however,
the
RAES & RAEF epoxy originally called for in the plans is no longer
available.
What can I use for a substitute, and where can I get it? I also need to
know
what to use for flox and micro. Please be specific.
Thanks,
Mark
Get yourself and Aircraft Spruce catalog. They have some good books
on composite construction.
BTW a Mazda two rotor is a bit heavy for a VariEze.
Paul Lamar
Mark,
Many people use Aeropoxy in the USA, for composite use.
Generally there is but three or four manufacturers in base resin (quality
epoxy) in the world. However there are many suppliers who specify different
characteristics of the hardener (catalyst).
So any good quality (read not cheap) will generally do the job. Having said
that, unless your aware of your need it's best to follow the trend of proven
quality products used in the field that it's intended for.
I know the Vision designer insists on testing cured samples to be assured
people from around the globe, building his design and using different
products meet a desired standard.
If any premade parts are not made of epoxy, you will find that epoxy will
stick to them but not vice versa.
A good book to read is 'Understanding Aircraft Composite Construction' by
Zeke Smith, I've had some good discussions with Zeke and he said he would
mention me in his next edition.
His book identifies the Vari-Eze 'RAE' system (epoxy) - no longer produced
as some builders have suffered serious reaction to the materials.
Hope that helps !
George (down under)
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.