Subject: Flight with Downsize Duct. Was Re: Bell shaped inlet corrdinates.xls
From: ACRE
Date: 9/4/2003, 4:14 PM


Ed Anderson wrote:

5200 (My normal cruise rpm)  burning 7.25 GPH at 4500 MSL with OAT
80F My
oil and coolant were both  180F


Perry Mick wrote:

That's interesting Ed, your cruise fuel burn at 5200 is similar to mine.
I think you have the four port? You probably have better porting, and
are
leaned back.

Perry


Correct, Perry

 I have street ported the engine (IO 25 ATDC and IC 60 ABDC) vice the stock
IO 32 IC 40 and I do have the engine leaned back to where the LED is off the
lean end of the scale, but not to the point where it would run rough.

Ed

More evidence you are down on max power Perry. Ed can richen his up for take off
and max power.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.