"Burns, Mark" wrote:
Paul;
I am building a VariEze. It is a project that was started
in '73. It
is in
very good shape, in fact, the original builder got an
excellent rating
from RAF
for the wings and canard. I know what fiberglass cloth to
use, however,
the
RAES & RAEF epoxy originally called for in the plans is no longer
available.
What can I use for a substitute, and where can I get it? I
also need to
know
what to use for flox and micro. Please be specific.
Thanks,
Mark
Get yourself and Aircraft Spruce catalog. They have some good books
on composite construction.
BTW a Mazda two rotor is a bit heavy for a VariEze.
Paul Lamar
Mark,
Many people use Aeropoxy in the USA, for composite use.
Generally there is but three or four manufacturers in base
resin (quality
epoxy) in the world. However there are many suppliers who
specify different
characteristics of the hardener (catalyst).
So any good quality (read not cheap) will generally do the job.
Having said
that, unless your aware of your need it's best to follow the
trend of proven
quality products used in the field that it's intended for.
I know the Vision designer insists on testing cured samples to
be assured
people from around the globe, building his design and using different
products meet a desired standard.
If any premade parts are not made of epoxy, you will find that
epoxy will
stick to them but not vice versa.
A good book to read is 'Understanding Aircraft Composite
Construction' by
Zeke Smith, I've had some good discussions with Zeke and he
said he would
mention me in his next edition.
His book identifies the Vari-Eze 'RAE' system (epoxy) - no
longer produced
as some builders have suffered serious reaction to the materials.
Hope that helps !
George (down under)
Mark,
Another alternative being used by a lot of Cozy builders these days, and
recommended by the Cozy designer, is MGS 287 or MGS 335. I've used both and
have a slight preference for 287. This stuff is totally odorless and
relatively non alergenic. It has a very low viscosity, especially when warm,
and wets out very easily. You can mix various ratios of fast and slow
hardener to control the cure time. You can get it from Wicks Aircraft. Don't
be put off by the price - you use less because of the viscosity.
Regards,
John Slade
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.