IMHO this is a major breakthrough in cutting the work required
... snip ...
This is a brilliant idea on whoever thought it up.
Good thinking outside of the box. Literally :)
Brilliant! brilliant! Brilliant!

IMHO this will become the cooling system of choice.

Paul Lamar

  This would also appear to do away with the need for cowl flaps - can use
cowl flap lever to adjust radiator angle.  Perhaps just have a rod connected
... snip ...
Certainly looks interesting and simple, who will be the first to try it ??

Ed Anderson

Good idea Ed.

BTW I am really jazzed on this rad location. This removes many of the
objections to liquid cooling systems. Simple cheap and easy to make and install.
Again: The rad IS the scoop, the duct and the diffuser.

Paul Lamar

Wow.  I thought you were joking at first, Paul.  After all, you DO throw
some sarcasm out there from time to time...

Well, maybe we should discuss some pros & cons.

Others have already brought up some of the Pros:
- light weight
- simple construction
- can be pivoted to control "scoop size"
- - increase angle for more cooling, more drag
- - decrease angle (towards airframe) for less cooling, less drag
- obviates the need for cowl flaps
- frees up cowl space

Here's some of the Cons:
- that looks like A LOT of drag - is it?
- MINIMUM drag is the radiators's rectangular edge-on area, PLUS the
rough radiator core area
- God, it's ugly
- debris has direct, unimpeded access to damage your radiator (this is a
big one)
- to coerce air THROUGH the rad, some upstream "baffling" (box?) will
need to be implemented; otherwise most air may simply go around the rad
- we aren't dealing with speed-reduced (pressure increased) airflow
here; this will be top-speed (lower pressure) airflow.

And here's a question to clear things up for the group: Is this a
"wedge", or "ramp" design?
- WEDGE: A wedge traps air against the aircraft belly, forcing it
through the rad core out into the slipstream.  Larger angles will scoop
more air.
- RAMP: A ramp impinges on the slipstream, forcing air through the rad
core, where it exits alongside the airframe.  A ramp would be like a
real thick, porous cowl flap.  Larger ramp angles increasingly impact
the slipstream.
- Each have their pros & cons: At high AOA, wedge becomes less
effective, and ramp becomes more effective (assuming belly mounting).

I know the idea of freeing up cowl space is alluring, but what is
keeping this arrangement from being moved up to the cowl belly vs. the
aircraft belly?  At the cowl area we can do some fancy fiberglass work
to make this look attractive, plus we'll have that big fan helping out
(in tractors).

Let the flames begin ...

- Vince Orton

I addressed most of these issues already. If the rad has a square
header tank you can always streamline it with gup.

Prop efficiency would be better with it further back.

It is a free country. Put it anywhere or do anything you want :)

I am going to run with it because I have been struggling with the
cooling system problem for five years. Nobody has built anything that
is totally satisfactory under all possible ambient conditions.

I have already built a test rig and ran it on top of the Van so I know it
will work and I can get a larger rad down there than will fit under the 
cowl. Just in case I need it.

Perry Mick has essentially the same thing and he has the smallest rad of
anybody flying with a rotary. Admittedly he is not making as much power
as some other people.

I expect our rad sizes to come down in the future using this system.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.