I am curious Barny. How are you going to adapt this to
the three rotor?

Paul Lamar

Barnhart wrote:

Paul,

Wrong model.  Looked at alot of stuff, some after market that could be done
if you really wanted to do an eshaft mount. Too easy to screw up seals and
bearings.

Meziere's 55 gph ewp doesn't have alot of flow with a 12 pounds of head
pressure.  It was so bad it erased right out of my memory. A one rotor would
run hot...

Looking at the model WP 430 series with their wn -24 fittings. Go to
http://www.meziere.com/ and look at page 17 of the E catalog.  Performance
is on page 18. Couldn't find the weight in my notes. It is alot lighter than
the stock 20b water pump.

One of the things about building a fairly large plane is the stuff you can
carry. Plan on carrying a spare alternator, wp, plugs, coil, accessory type
of stuff.  You should see what I carry in the back of our 300,000+ mile
Subaru.

Barny
MGDQ 20bt

Their web site does not appear to work with my browser as I saw no pictures.
Can you capture a picture for me and upload it?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.