Subject: Electric water pump (don't kill it Paul!)
From: ACRE
Date: 9/9/2003, 11:50 PM


Ok Paul, I looked at the Meziere enterprises site.  Their electric water 
pump is nicely built. They still recomend the
mechanical for "high flow" rates and pressures. Their catalog 
indicated the mechanical pump will flow almost 85 GPM at 6000 RPM
and requires about 5 HP to do it!

The electric pump ampere draw is listed at 11 amps. 
If my calculations are correct then the motor is approx .11 hp any way you
look at it the damm electrical pump is only going to work when 
minimal flow is needed. A drag racer that will only run for less
than a minute is my guess. For sprint cars they provide the 
mechanical pump, which does look like a nice unit, running off the
timing cover. I'm attaching the catalog sheet for the mechanical 
pump which seems realistic. This graph alone should show why
eletrical pumps are marginal at best.
Bill Jepson

My sentiments exactly. 11 amps at 12 volts is 132 watts. At 746 watts per
HP that is .18 HP gross HP assuming 100% efficiency. Not bloody likely.

There has been a sprint car pump available out of Tennessee that Jim Mederer 
is using on the 1000 HP turbo three rotor. Unlike the Meziere shown here it is a 
straight shot into the impeller so my guess it is more efficient.
I forgot the company name. 

Here is the Meziere chart from the pdf file you sent for the mechanical pump 
I think. Looks to be in the same ball park as the Mazda pump both 
flow and HP consumption. Vance will soon expand our RPM test range.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.