George Lendich wrote:

Paul,

I turned-up a plug for the housing centre hole, to set the depth 
of the ring gear to that of the starter gear.

As can be seen the ring gear fits perfectly in the top of the 
housing with about 2 mm gap (between gear teeth and housing) .
The starter gear teeth mesh nicely with the ring gear.

Weight is down to 13.8 lbs, which is by no means the lowest 
weight we can achieve.

George (down under)

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.