I found it.
http://www.kse-racing.com
---------------------------------------------------------------------
"KSE Racing Products, Inc. introduces a computer modeled water pump for
high performance engines. The CAD developed internal vane impeller and
dual scroll produces the most efficient centrifugal, crank driven water
pump on the market.
The higher flow and pressure capability of the H.P.D. water pump
decreases hot spot gasification and creates a higher degree of
boundary layer scrubbing. This results in improving the heat
conductivity to the coolant.
The H.P.D. ater pump design is the answer to the high flow and pressure
requirements of reverse flow cooling. Large 1 3/4" inlet port and
#16 (1") O'Ring Boss outlet ports are designed with high
flow, low restriction and dependability in mind."
------------------------------------------------------------------
The only problem with these things is they are dual output.
Paul Lamar
-------------------------------------------------------------------------------------------------
OK, what happens if you plug one of the outputs? Do you get cavitation?
Just less output? Could you merge the 2 outputs into a single line
(to be input to the 13b block)?
Ken Powell
I am not sure that would work. The internal scroll becomes discontinuous.
I have some email into them. They might have a single output version
for midgets or four cylinder race car engines like the Offy.
Racing Beat delt with it by putting another water inlet to the block.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.