Subject: Three rotor e-shaft water pumps.
From: ACRE
Date: 9/11/2003, 10:20 PM


| I found it.
| http://www.kse-racing.com
|
| ---------------------------------------------------------------------
| "KSE Racing Products, Inc. introduces a computer modeled water pump for
| high performance engines.  The CAD developed internal vane impeller and
| dual scroll produces the most efficient centrifugal, crank driven water
| pump on the market.
|
| The higher flow and pressure capability of the H.P.D. water pump
| decreases hot spot gasification and creates a higher degree of
| boundary layer scrubbing.  This results in improving the heat
| conductivity to the coolant.
|
| The H.P.D. ater pump design is the answer to the high flow and pressure
| requirements of reverse flow cooling.  Large 1 3/4" inlet port and
| #16 (1") O'Ring Boss outlet ports are designed with high
| flow, low restriction and dependability in mind."
| ------------------------------------------------------------------
|
| The only problem with these things is they are dual output.
|
| Paul Lamar

Ron Cass wrote:

Vince the acronym CAD  means Computer Aided Design. Its a drafting tool that
lets you create drawings without using a pencil. The computer does not
magically generate the perfect design of anything. That requires thought,
education, intelligence and some inspiration and as Edison remarked 99%
perspiration. There are some neat algorytms in todays better CAD packages
that permit of some pretty neat manipulation of Metal when the allied CAM
program is used to direct a machine tool. You can make some darned fancy
shapes that would be tough to do(not impossible) on old fashioned hand
cranked machines

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.