Barnhart wrote:

Paul,

Just finished talking with Jay at Meziere.  The inlet is on the right 
as shown on page 17 of their e catalog
http://www.meziere.com/. The hose fitting that it is showing 
on the inlet can be removed and replaced with an AN fitting up to
AN 24. It does have a dual outlet capability with the option 
of one being blanked off. The outlets can be positioned in 45
degree increments to the inlet.

Plan on having the outlet facing the adapter on the front 
accessory case.  Outlet a straight shot also to keep head pressure and
hp required to run it down.

 Forgot to ask him about a source of pulleys tho.....

Barny
MGDQ 20bt

AN24 is inch and a half. Stiff and heavy :)

How big are the outlets?

So what do they get for that pump Barny?
What will pulleys cost?

There still is a sharp 90 degree turn for the water going in.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.