That is a 89-91 Turbo two. You can tell by the intake manifold, the exhaust
manifold, the intercooler and the turbo. Note the oil cooler under the rad
while the 3rd gen had them on both sides of the rad in front of the wheels.

Where did that parts manual come from?

Paul Lamar

There is something wrong with those drawings, because Marc Wiese just
told me the FD 3rd gen has the engine mounting points at the same
location on the engine as the 2nd gen, on the middle housing. Oh well,
doesn't matter anyway, I'm just looking for the dimensions of the 3rd
gen oil coolers!

--
Perry

Marc Wiese is wrong. The third gen oil pan is drastically different than
the 2nd gen oil pan.  Here is another scan from the 1994 shop manual.
Looking up at the bottom of the engine. Effectively the same as the Schertz
beam. Ideal for our purposes as it is right about the engine/psru/prop
CG. These MM forgings are bolted to the bottom of the rear housing
beneath the oil pan. Not the middle housing.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.