Subject: Lighntening holes in bellhousing
From: ACRE
Date: 9/15/2003, 6:02 PM


Foreign matter is unlikely to enter any holes in a bell housing as there
 is a centrifugal vortex of air in the interior. Many Ross bell housings
 have had holes cut in them. It has never been a problem in over
 ten years of use. Ed Anderson's Ross had holes as I recall. Nobody
 running Tracy's PSRU have reported any problems along these lines
 in years of use.

 I think the cooling effect on the rubber bushing torsional vibration
 dampener far outweigh this minor consideration.

 Paul Lamar


The holes in this bellhousing or Tracy's could be covered with aluminum mesh
(window screen material). Mesh size chosen to suit ones FOD comfort level.
Weighs almost nothing, is see through, lets air through and removable.

Ed. Sadler

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.