Paul,
Seems you haven't been reading your e-mail or "Brain Fades" are back
:)
You posted his e-mail to ACRE recently (Attached).
Butch
From: ACRE <rotaryeng@earthlink.net>
Subject: Jerry Hey contact information
Date: Mon, 25 Aug 2003 21:33:34 -0700
Jerry Hey wrote:
We have now been in Indiana for two and a half weeks. Today I am
getting my bi-annual, the first since 1996. I am so looking forward
to
flying again even if it is behind a Cont. 0-200. Construction on the
new shop will begin next Tuesday. It will include a clean room for
the
rotary.
For anyone who wants to know my address is:
Jerry Hey
3790 S. 600 W.
Albion IN. 46701
Home phone:
260 799 4551
BTW Jerry if you are reading this let me know if you still have
the test fixtures. I have not heard from you for awhile.
Paul Lamar
I knew he was there. In fact I called him this morning. Me may be
going through
mid west cultural shock :)
Paul Lamar
Hi Paul Cultural shock is real!! Never met so many people so
guarded in every thing they say and do. I guess they don't want to
offend Jesus or anyone else for that matter.
I got your phone call today. Here is the situation. The move to
Indiana was a big deal to pull off. So much machinery and heavy stuff
to load and transport and we also have horses, dogs, cats....you get
the picture. Just before the move, business picked up. I had a
couple of rotary engine mount orders and a number of Tailwind Lycoming
engine mount orders and a fairly steady demand for other TW stuff that
I build.
Equipment, projects and fixtures completely filled my little shop.
It was becoming impossible to work in. Plus my basic response to
every fabricating challenge is to build another FIXTURE and there was
no room left to do this. Anyway, two weeks after arrival in
Indiana, my brother and I started construction on a MONSTER, by my
standards, shop. It is 64' x 40'. As soon as it is operational, I
will be back in the rotary engine mount business. only set up to do
better work The slab will be poured next week so things are moving
along. I am confident I will be fully operational by the end of this
year. Maybe sooner.
I will be able to build engine mounts for the new bell housing using my
present fixture. Like everyone else, I think the bell housing is the
ultimate solution and it is so well done. Just beautiful. I
imagine that when it is fully developed we will stop making the MMPs.
In the meantime, Danny can still produce them should anyone desire.
Due to problems with starter bolt locations, I have removed these from
the program. The main starter hole is still included. Bolt holes
can be located by transfer punch.
I will be taking machining classes in a few months. I am weak (self
taught) in this area. Maybe I will be able to provide machining for
the bell housing.
Lastly, I bought a 25 year old Tailwind (Cont. 0-200) which I flew
last week after getting my first BFR in nine years. IAS was 145mph at
4000 ft and 2550 rpm. Not bad for 100 hp. The PPort should come
close to doubling that performance.
I really miss working on the the rotary. Have not seen mine in two
months.
Keep up the good work. I'll be back.
Jerry
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.