Furthermore after getting everything off I could... the stock TB
still weighed three pounds!
BTW I arranged the linkage so the single and the dual butterflies
open at the same time.
Paul Lamar
Paul, It sounds like Mazda did very much like Carter used to with
the old AFB carb. They (Carter) had secondaries that were
connected to the throttle linkage, but had a second set of butterflies
that were weighted to open only by vacuum. The SU carbs
and many of the Kehin and Micuni vacuum carbs had the slide that
only opened by vacuum. In practice the vacuum carbs helped to
eliminate the need for acelerator pumps. Since almost all the
rotaries use FI they must have really wanted to maintain vacuum in
the manifold for driveability! Bill Jepson
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.