> >Hans Conser wrote:

 >>
 >>  This is on ebay, try a search for rx7 turbo manifold, I don't recognize
 >>  this one, thought it might be useful to someone.

 >Looks like a Weber carb manifold. Should work great if you have enough
 >room on top of the engine under the cowl. Probably tuned for 8500 RPM
 >but you could make and extension for it.
 >Paul Lamar

    Looks like the one that Atkins makes.

   Ken Welter

I doubt it. If you asks him about any part.... he makes them all! :)
It's on the Mazdatrix web site. I'll bet that manifold has
been around for at least 20 years. Maybe 25.

BTW that manifold will not fit the hot tip stock 87-92 turbo and turbo
exhaust manifold if you are thinking of adding a turbo later.

Jerry Hey and I asked Dave about this low profile water pump neck
at Seven Stock in 2002 and Dave told us "he made it". Turns out
it is a stock part probably from an early 12A or 13B. RX2 to RX4. I forgot
which.

Paul Lamar

Ken Welter wrote:

   I am sure he invented the wheel also.

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.