Brett & Tiana wrote:
I sent Dave a congrats e-mail yesterday after reading about his first flight
on the Vision website. While I'm still working on my aircraft maintenance
ticket and therefore haven't started my Vision yet, a couple of builders in
our group are well on their way with their Visions and have nothing but good
things to say about the plane, the plans, the support, and the
straightforwardness of the building process.
Here is a plans-built plane that looks like a Glasair, uses the same airfoil
as a Piper Warrior, seats two big guys side by side comfortably, cruises on
160 hp at almost 200mph, and lands at 55mph. STOL characteristics, while not
as impressive as those of an RV, are as good as most Cessnas. Here's the
best part: the airframe can be built for around $7000 U.S.D. This means that
with a 180 hp 13B and Tracy's redrive and a decent but not extravegant panel
you can build one of these for well under $40,000. Even $30,000 isn't an
unreachable cost target. Kinda makes the 3000-hour build time a little
easier to live with.
To view Daves plane, log onto www.visionaircraft.com and go to "builder's
websites". Then scroll down to Dave Cress' site and click on the "photos"
section.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.