Here is something that might work to test different intake
systems.
Fill the large cardboard box with styrofoam packing popcorn.
These will be used to simulate large air molecules.
The smaller the pop corn the better.
Start the industrial vacuum cleaner with the port closed.
Turn on the motor with the rotating disk and time how
long it takes to empty the cardboard box of styrofoam
pop corn. Relate the length of the intake manifold section
to the RPM of the electric motor. You will need a high
speed motor capable of several thousand RPM. Some drill
motors might work. Other wise tuned pipes will be very long.
Now you can try different pipe diameters and lengths.
You could also build a Mazda DEI system out of cheap plastic
tubing
and use a large Y in back of the disk. Each branch simulating
a rotor.
Much cheaper and much quicker than building a bunch of intake
manifolds.
Paul Lamar
What a mess that will make. It's going to be your very own
styrofoam
fountain ;)
Why? The vacuum sucks. The Styrofoam will wind up in the
canister.
Paul Lamar
True!
It's the foam beads that are in the way when the "valve" is about to
close and get dragged through the slot I'm talking about. Still a
great
Idea, in fact, I've seen a precedent, sort of. It reminds me of the
Acoustimass Bose display they use to show their port/chamber
resonance
problems, er, uh, I meant to say, design. :)
Chris C.
microcosman.com/aircraft
I did not mention it or show it but you could make the valve out of
steel sheet
and enclose it on each side with more steel sheet. The styro foam
may get sliced. The neat thing about air borne styro foam beads is you
can actually see the direction, density and volume of air flow.
Paul Lamar
That'd fix it.
Chris
BTW to simulate a two rotor intake system half the sheet should be open
and
the other half closed. It will need balancing. Transparent plastic
tubing for the intake parts would also be nice but the beads should
be a blur :)
Paul Lamar
Seriously, go to the nearest Bose outlet and look at their display.
Chris
OK Chris thanks for the tip.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.