Yeah,

if the coolers are nearly the same shape it should not be that much work to
change them and the gained info would be very interesting!! You would do a
big favor to all of us!
(If I would be somewhere around your place I´d even offer to do the work for
you, but I am only about 3000nm away...)

Thomas J.

Naw don't bother for me Perry. Actually I'll buy that 12A cooler from
you and cut a hole in the end for a look see. Can always tig it back up.
I am really curious why it is so much worse than the later coolers.

Paul Lamar

I couldn't use the 86 when the whole cooler was stuffed in the cowl
because one port came out the end, making the whole affair too long. I
can't use the 82 now because the ports come out the top and rear, the
hoses would be above the upper cowl line.

You don't have to buy it Paul, I'll just send it to you, you can do what
you want with it. I have two of the 82s.

--
Perry Mick

Thanks Perry.
In the later coolersI can look inside and see the turbulators
inside the tubes.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.