"Burns, Mark" wrote:

Counteracting the adverse torque is both simple and ingenious.
I haven't seen it but from what I am able to gather from the
 writings on the web page they are using louvers below the fan
to deflect the air, thrust, whatever being produced by the fan.
They would pivot much like an aileron, and be positioned from the
center of the hub out to the edge of the fan shroud. I would imagine
there would be several (maybe 6 or 8 louvers and would literally make
it possible for the aircraft to rotate 360 degrees in place. It may not
achieve all of its design specs, max cruise speed, range, etc, but what
new aircraft design does. You may disagree with me and not believe that
it will ever leave the ground, or if it does it will be uncontrollable,
but I am perfectly happy to wait until it goes streaking across the
sky to prove I am right.

Mark

If these louvers are split and they work as you suggest, it actually might
work.
As you said, happy to wait and see!

Thomas J.

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.