Subject: Sigard Ganswindt 13B powered GlasStar
From: ACRE
Date: 10/14/2003, 10:30 AM

ACRE wrote:

This airplane would win the best auto engine award at
any air show despite the fact it has a plugs up engine :)
(Judges know little or nothing about that.) It would probably
also place well in best of show.

It was beautiful and immaculate. Sigard recently moved
to Arizona from Illinois.

He is still having cooling problems using AC evaporator cores but
that is nothing new for evap cores. His inlet ducts could use improving.
Also he is plumbing the cores in series which in theory is not
as good as parallel.

The engine is fed by a four barrel carb with a nicely fabricated
intake manifold. Rather modest power I suspect.

His motor mount has a few design flaws but as long as he keeps
checking it for cracks it might be OK.

Paul Lamar

More pictures.

Paul Lamar

And yet more. The bottom picture shows the nice cowl flaps and the Spin Tech
muffler.  The oval slot on the bottom is the air intake for the carb.

Sigard has done everything possible to get the air out of the cowl but
it takes more than that. The back side of the heat exchangers must
have a clear space behind them equal to 50% of their height or width
which ever is greater. With the evap cores mounted in this position
the plugs up oil pan and engine interfere with this criteria.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.