Edward Klepeis wrote:

Dear Paul
    The VAM muffler is built and ready to be tested out to see what we have
come up with.Can you please send a mailing address
where I can send it to. You can see the enclosed pictures .
 Give me your comments on it good or bad.
               Regards
               Ed
      techwelding@comcast.net

You do beautiful work Ed. I think the quickest thing to do is ship
it to Tracy for the Shady Bend flying on the 24th and 25th of Oct.
I'll go down a couple of days early and help Tracy and Laura get
set up. Tracy and Laura willing.

I'll also get Tracy's test engine going on his test stand and make
a few noise measurements with my DB meter with the muffler
that is on his test engine now. Then we will bolt this muffler on
and repeat the measurements. This will give all who attend a chance
to see it and hear it. It will also give us a reference number for
an existing muffler. Something I don't have here right at the
moment let alone a working test engine. We can also compare it to
Tracy's and Chucks engine noise and what ever other rotary powered
airplane attends.

I'll check this out with Tracy tomorrow by phone as I am sure he is
busier than an one arm paper hanger.

Paul Lamar

OK Ed I spoke to Tracy and he is amenable.
Please ship it to:

Real World Solutions
Tracy Crook
5500 N.W. 72nd Way
Bell Florida
32619

phone 386 935 2973

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.