Edward Klepeis wrote:

Dear Paul
    The v.a.m muffler was shipped out today 10/14/03 to tracy in fla. 
after you run it and hear what it sounds like email me
your ideas or  suggestion and any one else who attends the fly in.
    On another subject I would like to put  together the eng 
in the pic with the muffler on  it  a static display of the after
market parts  from different venders tracy, bruce , fellow in 
louisville Ky with motor mount.I would bring this display with me
to the airshow to show the flying public what is being made  
for the aircraft/rotary converstions and from who they can get it
from.I would rig it up on small air tires so it could be brought 
to forums to be shown.  The next step after the static display
would be a running eng. minus prop  to show every one how the 
different venders items work .The eng in the pic. is a 1988 13b.If
any of the venders out there would like to be involved in a 
project like this please contact me and lets talk I think every one
could benefit from it.

Regards

Ed

techwelding@comcast.net

270 898 3776 shop

Good idea Ed. I'll send you some manifold parts and a water pump.
I think you should get in the motor mount biz.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.