If the wire is allowed to vibrate it sometimes cracks right were
the solder stops. Near impossible to detect this before it
happens and it is then too late.
Paul Lamar
Paul, Right in one. The reason for crimps is they are designed to grab the
stranded wire without a failure point. Using one of the calibrated crimpers
excellent joints result. My suggestion to the group is if there is a small
group you work with suggest a group buy.
My EAA Chapter is buying one to rent (cheap) to the membership.
Bill Jepson
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.