Subject: Plugs and wiring: was, crank angle sensor plug
From: ACRE
Date: 10/26/2003, 8:39 PM


If the wire is allowed to vibrate it sometimes cracks right
were
the solder stops. Near impossible to detect this before it
happens and it is then too late.

Paul Lamar


Paul, Right in one. The reason for crimps is they are designed to
grab the
stranded wire without a failure point. Using one of the calibrated
crimpers
excellent joints result. My suggestion to the group is if there is
a small
group you work with suggest a group buy.
My EAA Chapter is buying one to rent (cheap) to the membership.
Bill Jepson

  I bought one milti tool from Clveland Tools at Lakeland. Not that
expensive and does
Red, Blue and Yellow crimps W/ ratchet fail safe, Virg

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.