Subject: Drilled brake rotors.
From: ACRE
Date: 10/28/2003, 12:47 AM


Yes but they are widely used in road racing with great
success.

Paul Lamar


Paul, Perhaps us racer types should mention to George that hard
braking has been found to produce some barrier gasses on the disk
surface and the holes, in a vented rotor, allow these gasses to
escape improving brake performance. On solid rotors a slanted small
groove is used to the same effect.
Bill Jepson


Bill and George,
Every hole drilled provides a surface, diameter * disc thickness, from
which
heat will radiate and the disc be cooled by the surrounding air. A
drilled disc
has a far higher cooling rate, than a solid disc.
A cooler disc grips better and less barrier gases are formed.
Rolf Pfeiffer

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.