Subject: Old style intake duct verses K&M duct.
From: ACRE
Date: 10/28/2003, 9:31 AM

Ed Anderson is experimenting with the K&M bell shaped rad air inlet duct.
Kuchemann & Weber wrote a book in 1953 called the Aerodynamics
of Propulsion based on a lot of WW II experiments with radiator 
air intake ducts among other things.

The old duct is on the right side (left side of this picture) of 
Ed's airplane and the new duct is on the left. What complicates 
this experiment is the fact that Ed's rads are in plumbed series meaning 
the left rad (right side in this picture) has a higher temp differential 
which would normally increase the heat dissipation for that rad. In 
theory both rads should be plumbed in parallel for optimum heat transfer.

Both Tracy Crook and Ed report better results with the K&M bell shaped
ducts despite the too short distance between the opening and the rad.
K&M maintained the optimum length of the duct is 2.5 times the
max dimension on the radiator. Also clouding the issue is the
oblique mounting of the radiators. K&M dealt with an axi symmetric 
arrangement of the ducts and the radiators. I suspect a lot of 
experimentation using pito tube air velocity sensors will be required 
to optimize the uniform flow over the entire surface of the rad on a 
non axial arrangement such as these.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.