Those using the lower starter position could bolt up engine mounts in this
location, and just
cut
off the unnecessary sides of the casting.

Scott Gettings

******Sorry Scott,.......On my previous transmission I meant to ask that you
elaborate further on your statement above.....I'm not quite getting it....Is
this related to Pushers exclusively?

Thanks,
Butch

Don't forget guys you need to have the rubber bushing holders low enough
so you can get a diagonal lateral brace under the oil pan.

In a pusher this is not so important as there is room in the strakes
for diagonal lateral bracing.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.