The exhaust temp is a bit high indicating a somewhat rich mixture.
Tracy is seeing as low as 1550 F as I recall.

Ian is off the list right at the moment. He is probably out in the outback
fixing a high power transmitter someplace.

Paul Lamar

A taste leaner, or a bunch richer, but not what you have now. 
That 1760 is too high. It is OK to pass through while leaning to
leaner than peak EGT. But that is just for a second or so.

Best power is around 1600 degrees. If you need to run between 1700 
and 1800 (why)? then you need ceramic apex seals $$$$$$.
Lynn Hanover

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.