Paul, you probably figured this already but when I modeled the VAM
     > originally I wanted the point of max restriction slightly ahead

of

     > the exit of the cold pipe. When I reviewed the jpegs I sent this
     > wasn't obvious. This area was supposed to be near the turn into
     > the tailpipe. Your comment on extending the pipe would acheve

the

     > same ends. I made a note on the original and have included it
     > for ref. Thanks, Bill Jepson

Is this thing down the road going to be for sale???

Tom R. C. Smith
Long-EZ #1353
N12TS
A&P
Hanger 25
Nuttree Airport
Vacaville, Ca.

Yes but it needs more testing and a little more development to make
it quieter. Jerry Bass might want to take over the prototype
testing and  development.


Paul Lamar

Jerry Bass wrote:

Yes I would like to test the VAM pipe. I would have to lenthen the
out pipes from the block, to miss my engine mount leg.

Then I would buy 321 ss for the out pipe from the VAM.

It will coinside with the mod to the bottom of the nose bowl.

Jerry Bass
540-932 3124

OK Jerry contact Tracy and have him ship it to you. You won't mind
paying shipping cost will you?

Paul Lamar

I'll be happy to pay the shipping.  I will need one of these mufflers
eventually.

If Jerry or Tracy would like to let me know the amount, I'll send a check.

Scott Gettings
sgettings@cfl.rr.com

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.