> > I just happen to have Master Cam but I am still not up to speed on
it. I don't know which is better. I do know that Master CAM
accepts
Rhino IGES.
Paul Lamar
Paul, most of the systems will accept iges files. I have had
the best luck while transfering 3D files using the ASIS (.sat) files.
I know all these were supposed to be proper computer conventions
but it seems everybody has a zero or a one in the wrong place somewhere
and the files only transfer partially. The biggest problem I have
when transferring files is making sure the version of the transfer
medium is the same. I am forever searching for the correct version
of the translator when working with autocad files. (YUCK) Bill Jepson
Mark Wrathall wrote:
Hi Paul,
Seeing as you are a Rhino fan, have you looked into Visual mill? MecSoft's
visual mill reads native Rhino file format, requiring no export. They have
just release V5, which is reputed to be very powerful.
Regards,
Mark
Interesting Mark. I'll look into it. Thanks.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.