Subject: side ports & peripheral ports together
From: ACRE
Date: 11/6/2003, 7:24 PM


     > > Archie wrote:
     > http://www.nova-racing.com/nova_gb/index.htm
     >

     Snips...

     >          Fresh gases initially flow through one end plate, stream through the rotor, bearings and
     >          shaft cooling and lubricating, before passing into the combustion chamber through the
     >          opposite end plate.
     >
     >          At ~5500rpm a negative-pressure controlled butterfly valve opens a second port feeding
     >          additional gases directly into the combustion chamber.
     >
     >          These cold gases give rise to the enormous power of the XR8. The untypical processes in
     >          the engine result in very long control times that positively influence exhaust gas values,
     >          which are typically under 1% of comparable 2-stroke units and equal to the best 4-stroke
     >          levels.
     >

     This sounds like both side ports and peripheral ports. There appears to be
     tremendous HP potential for this approach. Mazda could use the same idea and still
     have good EPA fuel consumption and low smog  numbers on the EPA driving cycle.

     Something like 170 HP per rotor is possible normally aspirated at 8500 RPM
     with the light weight RX8 rotors. That is 340 HP for a two rotor for the
     arithmetic challenged. At 6000 RPM it could be as much as 240 HP normally
     aspirated. I can hardly wait for Richard to get his peripheral port working
     on his one rotor in addition to the just the one side port he is running on now.

     For aircraft use you could take off on both and fall back to the side
     ports for cruise.

     Paul Lamar

     Another benefit of this approach is a stable low-spped idle using only the side ports - a great benefit if you have a
     slick airplane and a fixed pitch prop.

     Ken Powell

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.