Joseph Berki wrote:

Does anyone have dimensions for Mazda oil coolers for a 93r1 or tII ?  I am
not familiar with the different designations.  I am looking for a 3rd gen
cooler which is more square than the 2nd gen 4X 24.  Thanks for any  help.

Joe Berki
Limo EZ

I think you can get a pretty good idea by scaling it off these pictures.
I don't have one but Marc sent these pictures. You will probably need two.

Paul Lamar

Joseph M Berki wrote:

Thanks Paul,
         Did the car use 2 coolers?

Joe

Yes the 3rd gen used two coolers in the manual TX version. The RX8 also uses
two coolers in the 250 HP version. The 200 HP auto transmission
version of the RX8 uses only one. 

BTW my RX8 has about 3000 miles and I think I am feeling a slight HP increase.
Either that or I am getting better at shifting it :) Perhaps the weather
is just cooling off.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.