"Brian D. Cain" wrote:
Hey guys, I was so impressed with a product I used today that I
thought I'd
share
my joy with you all on it. Today I went to Home Depot to look for
some
good,
heavy-duty cleaning stuff I could use on four rotors that I'm
cleaning up
for a pair
of engines I'm re-assembling soon. After trying a few things over
the past
week
because I couldn't find any Simple Green (what I've normally used in
the
past), I
ran across some stuff made by Zep. They've got a humongous product
line
(almost
looks as if Home Depot has a business relationship with them per the
litany
of
products by them they had available). Looking for the heaviest-duty
stuff
they
had, I went for their Industrial Cleaner/Degreaser. It looks and
smells
identical
to the Coastal Super Power Clean that's found in automotive chain
stores
(deep
purple colour). This stuff is quite caustic; it burns the skin with
prolonged
contact and only after a few seconds it will dry the oil right off,
leaving
your skin
dry.
After dunking the engine rotors in for less than two hours in a
diluted mix
(one
gallon water and one gallon Zep cleaner), the carbon was just eaten
away.
About
15 minutes of brushing and voila -> brand new looking,
silver-coloured
rotors.
They're so clean they're already beginning to develop surface rust!
B
Brian,
Any indication that this cleaner attacks the bearing material?
Kelly Troyer
-"Brian D. Cain" wrote:
Actually, yes. The surface of the rotor [bearing] seems to be bubbling up and
discolouring some.
It's enough for me to advice those that use this stuff to change the
bearings.
B
Brian D. Cain -/- Grand Prairie, TX -/- bdc196@comcast.net
BDC Motorsports - Performance Rx-7 13B Rebuilds, EFI tuning, etc.
MSN bdc196@hotmail.com, Yahoo! bdc196, AOL Symajhi, ICQ# 1733105
http://bdc.cyberosity.com -/- http://groups.yahoo.com/group/HaltechSupport
Can you press them out before you soak it and reuse them?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.