kevin lane wrote:
I'm sure there is a good reason, but was wondering why an engine
couldn't be oil cooled, rather than water cooled, and simply
have a single, large oil cooler? perhaps the pressure needs
to be too great, or the delta T no good for oil vs water? has an
air cooled rotary ever been tried?
Kevin Lane Portland, OR
e-mail-> n3773@comcast.net
web-> http://home.comcast.net/~n3773
The thermal conductivity of oil is one third of the thermal
conductivity of water.
Marks SHFME page 4-82
Paul Lamar
Paul and Kevin,
Yes there are engines that have been designed to be oil cooled. The Suzuki
1996 GSXR was designed as totally oil cooled. The
engine also was partially air cooled. Paul is correct of course about
thermal conductivity. The size of the oil coolers needed
for oil cooling the rotary would not be pratical. Bill Jepson.
PS Yes there was an Air Cooled Rotary, Designed by of all people
BSA (The english motorcycle guys, Or to you really old guys
Birmingham Small Arms) Bill
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.