Subject: oil cooled 100%?
From: ACRE
Date: 11/8/2003, 2:35 AM


Paul Carey wrote:

Paul

Actually the air cooled rotary was by Norton in Sheffield, England. I was
there in the mid 80's checking out the engine for Eagle Aircraft in Perth,
WA. The air was drawn through the centre housing by an exhaust ejector.
Nice little engine - PP with carby's. I brought an engine back and did
testing on it for a while.

Regards

PC

Paul Carey LAME, MC

Paul C, I followed the BSA development of the rotary for some time.
They actually developed a functional road bike. The intake
charge did pass through the rotor, they had a little ram
effect intake that looked like a radiator above the engine. When BSA
went belly up along with Triumph, Norton Villers aquired both
companies and re-organized as NVT Norton Villers Triumph. The
rotary project lay dormant for a while until Norton was on the
 edge of insolvency. They knew they needed something other than
antique vertical twins. They revived the rotary but never sold
the bike to the public. They made police bikes using the engines.

They even attemped a GP bike based on the engine, but like so
many racing orginazations the FIM couldn't decide what the
displacement of the engine was and finally decided on a size
that made the engine inelligble for GP or superbike racing.
One interesting fact about the engine was that the intake cooling
system was interesting enough that the patent was purchased by
Toyo Kogo (Mazda), one of few outside patents they purchased
other than the original Wankel patent.
Bill Jepson

Charge cooling limited the HP so the by the time Midwest took over
the Norton they converted to peripheral ports and used air pumped through
the rotors to cool them. Other  makers continued to use charge cooling.
Sachs built an  air and charge cooled  engine and it was 
used in the Herc bike along with a bunch of other applications including 
lawn mowers.  Charge cooling adds heat to the charge reducing the 
mass of the mixture ingested thereby reducing the power.

Air cooled rotaries are only practical in one rotor
form unfortunately. It takes too much HP to pump enough air between
the end housings. This reduces the net HP out and hurts the BSFC.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.