Subject: Tracy & Bruce new apex seals.
From: ACRE
Date: 11/11/2003, 10:26 PM


Bulent Aliev wrote:

What about the new 2mm apex seals that Tracy demonstrated against
the
factory ones. Very impressive.
Bulent


-"Brian D. Cain" wrote:

We'll be building two engines using Tracy's new 2-piece 2mm apex seals
and springs pretty soon.  Both of them will be in a high powered
environment
so I'll
be anxious to see how they perform.  I expect good things from them.
One of
our friends
in Canada is using his stuff and, although he's satisfied, he's told me
that
they had an
extensively long break-in period of 1800 miles (automotive miles, that
is).
I'm assuming
the engine in question is using re-used rotor housings as well so that
may
be part of the reason behind it.

B

Brian D. Cain -/- Grand Prairie, TX -/- bdc196@comcast.net
BDC Motorsports - Performance Rx-7 13B Rebuilds, EFI tuning, etc.

Yes, longer break-in time when used on used rotor housings is the price you
pay for the increased durability.  BTW,  the testing period is now over and
the "Not recommended for Aircraft use"  limitation is now gone.  No failures
so far, even on a turbo installation that ran into detonation.  Don't know
if you could hear it in an airplane but detonation is *definitely*  audible
in a car.

Tracy Crook

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.