The ideal seal would weigh nothing so it could exactly follow the
contours of the rotor housing at high speed.
Least I forget the ideal apex seal should not shatter under detonation.
Here are some other factors relevant to the manufacturing of apex seals.
As you can see from these charts the BSFC at light load (typical of
automotive use) depends on excellent sealing.
Paul Lamar
It would be cool if they could figure out a way to plumb pressurized oil
behind the
seal, through the eccentric somehow, acting like the spring. A
calibrated amount could leak past to lube the seal. I'll bet that would
only take 3 or 4 million dollars to implement.
Chris C.
microcosman.com/aircraft
Hurley has already done that.
Royce
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.