George Lendich wrote:

Paul,
These are the Mazda parts, you can see there isn't much difference to the 
Mazda and the Ford parts I sent under separate e-mail.

Just for your and ACRE information, I guess now that there is a 
merger between the two, some sharing of technology is
inevitable.

I'm trying to see if I can purchase parts from here but I very much doubt it.

George (down under)

I think what you are looking at here is a scaled down version of the
C6. It was built by Jatco starting about 25 years ago. Japan Automatic
Transmission Company. A joint venture between Toyota and Ford.
I had such an auto transmission in my 1976 13B Cosmo and my 1975 RX4 station
wagon. Now I don't know for sure what
transmission they used in the three rotor Cosmo build in Japan. Could
have been a C6. I doubt the Jatco would have been up to the HP generated
by the turbo 3 rotor but I could be wrong. I don't think they used an automatic
in the 3rd gen RX7 but I could be wrong about that too.

In addition to the parts gif here is a photo of the Jatco parts.

I will say the RX8 auto transmission is big and it could be scaled 
up version of the orginal Jatco. It could also be something else. 
Don't know for sure. Here too is a picture of that.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.