Butch and George.

My suggestion for accommodating all sorts of starters
is leave the starter mounting area blank and let people
cut their own starter holes. A 2 5/8" hole saw is about right
for the large pilot hole and they can match drill the hold
down bolts.

Provide instructions on how to locate the large pilot hole
based on the gear root diameter of the ring gear used and the OD
of the starter pinion gear of the starter they want to use.
They can measure over from the machined center hole.

Minor adjustments can be made with a die grinder.

Paul Lamar

I agree. That way we can use any mazda mt starter, incl the 3rd gen (if
it mates with the ring gear-probably not unless you use the same 3rd gen
ring gear, and I don't think it will fit Tracy's psru w/o mods......
[Marc Wiese]

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.