I am in process of going through my junk yard '88 13B and a couple
of the "stand pipes" (if that is the proper term) coming out
of the housing is pretty corroded and another is cracked so
I really need to replace them.  What is the best way to get them
out...propane torch and attempt to extract it with pliers?
Additionally do I just pick up a couple new ones from the local
Mazda dealer or are there other sources?  Thanks for any info.

Doug

Got any pictures Doug? If you are talking about the oil filler pipe
that is just pressed in. If you can find a tube that just fits inside
you can wiggle it back and fourth until it loosens and comes out.

If you are talking about the heater connections those are screwed
in. If they are corroded you might try a large EZ out. Perhaps
drill them out and re tap. I don't think you will find parts that
old at the Mazda dealer. If I am wrong and the dealer somehow has them they
won't be cheap. You probably need to make some new ones or use AN
fittings.

Paul Lamar

Hey Doug,
Could you please use your whole name and aditional info instead of just your
first name. I do not want others on the list to get confused with our posts. I
always try to post full name and where I live. That way people can ask regional
questions about your operating environment. Cheers,
Doug Mueller
RX-6 N900DM
Henderson,NV

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.