Subject: Prince P Tip Prop for sale
From: ACRE
Date: 11/22/2003, 9:04 PM


Jerry Bass wrote:

Paul, I have a Prince Prop, 68" dia by 76" pitch for sale. It origonaly
cost $1600, Will take $1200 and pay the shipping.  The prop was used on my
Rotary, and worked fine. It will work on any O-320 or an older O-360,
Standard RH rotation with a 4.75 bolt circle.

Jerry Bass
540-932 3124


Is that in addition to the one you have on the engine Jerry?
If you are replacing it what will you use next?

Paul Lamar

Jerry Bass wrote:

Yes it is my first one.  I replaced it with a Thick heavy one that
I could hardly turn. Then He shipped me the one I am running.

The old one is grey in color.

Jerry Bass
540-932 3124


Welcome home Jerry. You have a lot of catching up to do :)

Paul Lamar

Jerry Bass wrote:

I rebuilt my exhaust pipes and put on a new Ox sensor. It reads just 
right, in the middle of the LED band. I guess tuning by ear works too. 
I did have an OX sensor when I did the A computer programing.

Jerry Bass
540-932 3124

You want to run it up to 200 degrees lean of peek at altitude
for lower fuel burn. If it is in the middle at cruise you are
burning too much gas. It does not hurt a rotary to run it lean.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.