in the convertion to aircraft,
but

that is not an official Amsoil statement.  In aviation application,

the

user

is on their own.

Duane C.Service  dservice@comcast.net

 You beat me to it, Duane.  I wonder if the folks in Tech Support

think

we're ganging up on them...!
"tech@amsoil.com  11/21/03  11:25am
Prior to the RX-8, we had been recommending our AMSOIL Synthetic 10W40

High

Performance Motor Oil (AMO) for Mazda rotaries. We have been for years

and

it's worked excellently. We have always followed whatever Mazda said

as

to

the method of oil injection as part of the lubrication process. We

have

not

actually received the lube spec details on the RX-8 yet, so we're

holding

off on recommendations until we see them.
 Thank you,
 Jim Van
AMSOIL Technical Services"

Jim and Duane,

Excuse my misunderstanding - are we talking about 2 stroke synthetic oil

or

4 stroke synthetic oil.

I assume we couldn't run the motor on 2 stroke synthetic oil, but we can

put

it in the fuel for seal lubrication or inject it separately.

If we run the engine on Amsoil 4 stroke synthetic oil and inject it into

the

engine normally does it also burn cleanly?
George (down under).

Hey George,
The comments from AMSOIL Tech Services are about the use of synthetic engine
oil in the engine.
The extra strength and cleaner burning of a synth 2-cycle oil makes them an
excellent option as well, but only if mixed in fuel or if the injector
source is modified.
Later Mate,
  Andy

Commercial AMSOIL Dealer

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.